Friday, October 30, 2015

DIY Removable Exhaust Hangers

Adding a new exhaust system to your ride but don't want to use the cheap parts store hangers and clamps?

Lets face it we all know how horrible they are,  aside from just looking tacky, they almost never last.  The U-bolt clamps are just as bad, you better hope you have them exactly where you want them because chances are, once you tighten them down they are sure to be rusted shut in a few weeks.

DSC05037

Here is a way to make your own custom exhaust hanger using one of those cheapo parts store hangers.  Its simple, cheap, and even allows the whole system to be easily removed.

What You'll Need:

- Universal Exhaust Hanger with an open, pivoting end. (It must be this style, you'll see why later)

P1030219

- 1.25 " X 1.25" piece of 1/8" steel

- 5/16" or 3/8" Thread bolt about 1" long, lock washer, and hex nut.

- High Temp Paint (to prevent rust)

p39628

 Process:

P1030224

First you will need to cut the end of the exhaust hanger, with a Cut off Wheel, along the line drawn. This piece can be thrown out.

P1030225

After the end is cut off you will be left with a tab sticking straight down.

P1030233

Clamp the square tab to the hanger with enough room to drill a hole big enough for the bolt you are using, in my case it was a 3/8" hole.  Mark the center of where you want the hole to be and use a Center Punch to indent the metal so the drill bit doesn't wander.

P1030235

With the two pieces clamped, use a Step Bit to drill a through both pieces so the hole will remain in line.  Pass the bolt through and tighten by hand so the tab remains square. Step bits make easy work of drilling large diameter holes, an essential tool when doing any type of metal fabrication.

P1030244

Using jack stands or wire position your muffler or exhaust pipe in the location you want it to sit under the car.  It is a good idea to determine where you want to mount the hanger to the body or frame of the car first, to insure the hanger is long enough to reach the pipe. (As an example I am using a piece of exhaust tube on a work bench and the hanger suspended from a piece of metal in a vice)

P1030246

With the hanger mounted under the car, align your exhaust pipe exactly where you want it to hang.

P1030250

Tack weld the tab to the exhaust pipe or muffler.  Remove the supports holding up the exhaust and check the positioning.

P1030255

If is where you want it, finish the weld along the tab. Allow the metal to cool off before unbolting the hanger.

P1030258

Once it is cool to the touch, remove the bolt.  Creating this custom exhaust hanger will cost about the same as using those tacky U-Bolts, and it makes exhaust removal a breeze.  All that is left to do is a quick coat of High Temp Exhaust Paint and you'll have a simple rust free solution to mounting your exhaust system.

Check out the Eastwood Blog and Tech Archive for more How-To's, Tips and Tricks to help you with all your automotive projects.  If you have a recommendation for future articles or have a project you want explained don't hesitate to leave a comment.

- James R/EW

How Ford Secretly Reinvented the Mustang’s EcoBoost after Not Meeting Focus RS Specs - Video

Ford may have swept us off our heel-and-toeing feet at the Geneva Motor Show back in March with the 2016 Focus RS, but the team had a greater challenge on its hands than it might have seemed at first. With the car having been shown at the Swiss venue, the carmaker realized the engine was not quite up to the go-fast standard of their manic hatch. The 2.3-liter turbocharged four of the Mustang had to be massaged in order to be hardcore enou... (continue reading >>)

Thursday, October 29, 2015

Volkswagen Investing $900 Million in Chattanooga to Build New Midsize SUV in 2016

The Volkswagen Group announced an operating loss of €3.48 billion ($3.86 billion) in the third quarter, after setting aside a huge contingent sum to fix the engines affected by the Dieselgate scandal. The new CEO Matthias Muller has already announced plans to cut some of the 300 cars sold across more than one dozen brands, as well as severely cut expansion plans. Despite this, the Germans just reaffirmed their commitment to inves... (continue reading >>)

Wednesday, October 28, 2015

Italian Organization Files a Complaint Against Marquez and Lorenzo

CODACONS is an Italian organization working in environmental protection, users' and consumers' rights, and it has filed a complaint against Marc Marquez and Jorge Lorenzo, invoking Article 3.1 (and reportedly more) in the FIM Regulament. CODACONS, which stands for Coordinamento delle Associazioni per la Difesa dell'Ambiente e dei Diritti degli Utenti e dei Consumatori, also addressed the complaint to the management of the S... (continue reading >>)

Keep Your Hands Warm with Nitrile Gloves- Quick Tip

Winter is just around the corner and if your up north the cold is a major speed bump in getting your project done.  By far the biggest issue when dealing with the cold is keeping your hands warm, sure you can wear thick gloves but it then becomes impossible to handle small parts.

P1030209

Here is a tip that'll help keep you working into those cold winter months.

Wearing Nitrile Gloves as your first layer does an amazing job of keeping your hands warm.  Since nitrile gloves are non porous, they act as insulation by not letting any heat or moisture escape from your hands.

P1030213

If you usually wear Mechanics Gloves try wearing Nitrile Gloves under your other gloves, this will not only keep you hands warm, it will also act as a chemical barrier in the event of a spill.

P1030215

This trick even works under your Welding Gloves, Nitrile gloves are thin enough to fit under just about any pair of work gloves.  I even wear them under my snow gloves when shoveling and skiing, don't put yourself at risk of getting frostbite when a solution is it this easy.

Check out the Eastwood Blog and Tech Archive for more How-To's, Tips and Tricks to help you with all your automotive projects.  If you have a recommendation for future articles or have a project you want explained don't hesitate to leave a comment.

- James R/EW

5 Essential Items You May Be Missing in your Shop

I've learned over the years that the better equipped and the more organized you are in your garage or workshop will reflect in your work. We decided to put together 5 items that are key in keeping your productivity and quality of work up.

Maserati Alfieri Coupe Delayed Until 2018, New GranTurismo Arrives Even Later

Surprise, surprise – the ambitious plan set in motion by Maserati back in 2014 proved a bit too ambitious for its own good. Due to the limited resources available within the Fiat-Chrysler Alliance and the fact that Quattroporte sales are lower than expected, the sexy Alfieri coupe concept has been delayed. A short while back, Maserati revealed something called the 5-year plan, under which six new models would be launched between... (continue reading >>)

Honda Fit / Jazz and City Getting 1.0 Turbo Three-Cylinder Engine by 2017

Honda of Brazil has revealed plans to start selling a flex-fuel version of the latest 1-liter turbocharged version the company is currently developing. It will be available in late 2016 or early 2017 on the Fit subcompact hatchback and its City sedan cousin. Of course, if Brazil has time to take a new engine and make it run on ethanol by early 2017, Japan should have it even sooner. But we're not here to place bets. (continue reading >>)

BMW Prepares Four North American Premieres for the 2015 Los Angeles Auto Show - Photo Gallery

At this year’s Los Angeles Auto Show, BMW will be bringing out four North American debuts in the shape of the BMW 330e, M4 GTS, 2016 X1 and 2016 7 Series. All of them will be available for viewing starting with November 18 at the BMW Stand at the Los Angeles Convention Center. Of course, those won’t be the only cars present on the set, the Germans bringing the X5 xDrive40e, BMW i8, and i3 as well within the BMW stand. ... (continue reading >>)

Weird Nazi Toys: Messerschmitt Me-163 Komet Is a Rocket Interceptor - Video

While Hitler's fanciful ideas about how wars should be fought cost him the war and resulted in millions of unnecessary lives lost, millions of marks were spent on pushing the envelope of aeronautical engineering. The V1 rocket is the most famous example of this, as it laid the groundwork for putting men on the moon. However, we're quite taken with the Me-163 Komet as well. A project of the same Messerschmitt aircraft company tha... (continue reading >>)

How to Convert Late Ford Banjo Rear End to Spring Over Axle

When you're building old cars you sometimes have to work with "what you've got", especially when you're on a tight budget. If you're building a hot rod using period correct parts you may need to mix and match parts to get something that works for your particular vehicle.

BMW S1000RR with Custom Launch Control Takes Off Like a Dream - Video

The BMW S1000RR is, unquestionably, one of the most exciting superbikes of the last decade. The Bavarian engineers also equipped the machine with plenty of cutting edge technologies that gave it the upper hand on both track and street. Bren Tuning takes things one step further and delivers a custom flash with an insane Launch Control feature. Still, it looks like even the good things can be improved, at least this is what Bren Tuning'... (continue reading >>)

DreamWorks Animation CEO Thanks Elon Musk after His Tesla Model S Saved His Life

If we were to tell you the full name of DreamWorks Animation’s CEO it probably wouldn’t ring a bell. But what if we told you that as a founder, Jeffrey Katzenberg has overseen the production of successful animated franchises such as Shrek, Madagascar, Kung Fu Panda and How To Train Your Dragon? Katzenberg is not just one of the big shots in Hollywood, but he also is a big political voice in the showbiz. Believe it or ... (continue reading >>)

BMW E36 M3 with LS6 V8 Puts Down 364 WHP on the Dyno - Video

We’ve been getting deep into LSx territory latel,y looking for the best possible mix between GM’s legendary V8 engines and BMW’s chassis tuning. After taking a look at an E39 5 Series with a 6-liter V8, this time we’re checking o... (continue reading >>)

This BMW E34 5 Series Has a V12 Under the Hood and Can Be Yours for $7,999

The BMW 8 Series cars are loved by enthusiasts more for their looks rather than their performance. Yes, they had massive engines under the hood but they were definitely not the fastest cats on the road. And when you start thinking about their reliability, things start looking even worse for the Bavarians. The internet is filled with testimonies from owners complaining about how much they invest in maintenance alone, leaving all other thin... (continue reading >>)

Repsol Claims Rossi Premeditated His Kick on Marquez, Threatens to Leave MotoGP

Spanish automotive lubricant manufacturer and Honda title sponsor in MotoGP Repsol is making threats that they could decide to leave the premier class. The reasons they invoke are Rossi's "premeditated" and "unsportsmanlike" kick at Marquez last Sunday at Sepang. This sounds painfully similar to the threats Honda made years ago when the spec ECU and, later, spec software came into the discussion. R... (continue reading >>)

Nico Rosberg Enjoying His Time in Austin at the Wheel of a Mercedes-Benz 300 SL - Video

One of the great perks of working for Mercedes-Benz one way or another is that at some point you might get the chance to drive one of their iconic classic cars. On a scale from one to ten of the most beautiful Mercedes-Benz cars ever, the 300 SL must rank at... oh, I don’t know, it’s impossible to choose from so many of them, but it’s definitely up there, just under the 300 SL Gullwing. (continue reading >>)

A Crash Course Through the Timeline of Lewis Hamilton’s Racing Career - Video

Won-two-three is Lewis Hamilton’s mantra these days, after successfully acquiring his third ever Formula One Driver’s World Championship title and his second in succession. Not all great stories have a similarly great beginning, but Lewis’ kind of does. We’re used to Formula One drivers starting off in karting from a tender age and then moving up the ranks until they end up in GP2, Formula One&... (continue reading >>)

There's No Telling How Lucky This Rider Is - Video

There is hardly a road user that has never made any errors. These things happen, and the list of reasons that cause them is huge. However, making errors when on two wheels can have dramatic consequences and this is where the need of not being an ignorant rider kicks in. Unfortunately, when it comes to scooter riders in many Asian countries, we get to see so much recklessness that it almost scares us. Speeding is probably the biggest plagu... (continue reading >>)

One of the 10 Ever Made Aston Martin DB10s Featured in Spectre Will Go to Auction

It turns out it’s not just Daniel Craig who gets to put his hands on one of the rarest Aston Martins the British luxury sportscar maker has ever created. One lucky and quite rich fellow will too have this chance, sometime next year, when one out of ten will go under the hammer. The exclusivity factor went over the top with this British contraption, as it was clearly stated that Aston Martin would only make ten units of their DB... (continue reading >>)

Fitment Issues with Stamped Patch Panels

In the past finding replacement body panels for a classic or antique car was very challenging, usually they would have to be taken off of a broken down or wrecked car.  If you could find one it was great because its sure to fit as long as its not damaged.  Present day those old cars are becoming harder and harder to find and the junk yards are filling with late model imports.

amdmetal

Companies like Auto Metal Direct (AMD) and Classic Industries have opened up a new market by offering brand new stamped panels for hundreds of cars all the way back into the 1930's.  These two are by far the leaders in the business because their parts have been fine tuned to have the best fitment and their higher prices reflect the quality.

Are There Other Options?

Budget builders have found some relief because there are a few companies that offer the same parts but at a much lower cost, the only issue with these is that they have a reputation of not fitting the way they should.

If you're on a budget and have some metal fab and bodywork experience, the cheaper route may be the way to go. You are still getting brand new metal that is meant for your vehicle.  These panels will  be very close but may not have the exact body lines, missing mounting holes, and sometimes be slightly too long or too short.

Camaro Freak, on the Hotrodders.com forum, had these same issues with a new driver side door for his 69' Camaro.

PastedGraphic-1

After aligning the body lines with the front fender and rear quarter, the fitment was completely off.

PastedGraphic-2

Along the front fender the door gap was tight at the top and grew wider as it got closer to the center body line.  Towards the bottom the door sits slightly inside the rocker and fender.  If you look closely the peak of the center body line is also a slightly different shape.

PastedGraphic-3

There were similar problems where the door met the rear quarter panel.  The door edge above the handle mount looks like it is a different shape causing a larger gap along the top edge.

Whats the Best Solution?

nova hood

Deciding which route to go can be difficult because there will be a trade off with both options.  It really depends on how much body work you want to put into the car, and how much you are looking to spend on the project.

Depending on the part and how complex it is, the more expensive parts will be worth it in the long run. For example, if you need an entire fender or door skin the big name brands are the way to go because they will be the closest match to your car.  But if you just need a patch panel for a smaller area that does not intersect any body lines, the cheaper metal will save you a lot of money because you will need to do some fabrication anyways.

If you run into any of these issues Eastwood has everything you need to fabricate and modify those patch panels to have the perfect fit.

Check out the Eastwood Blog and Tech Archive for more How-To's, Tips and Tricks to help you with all your automotive projects.  If you have a recommendation for future articles or have a project you want explained don't hesitate to leave a comment.

- James R/EW

This BMW E91 3 Series Claims to Put Down 813 HP Thanks to Huge Turbo - Video

As we told you recently, BMW is seemingly trying to limit the tuning capability of its 3-liter inline 6-cylinder engines as time goes by. Earlier this year, we took a closer look at the new B58 plant and noticed that squeezing more power out of it than what the engineers decided it is the optimum amount will be a tricky task. It’s an ongoing trend, though, one that can be noticed over the last few years. The N54 twin-turbo engin... (continue reading >>)

McLaren 570S vs. McLaren 650S 0-124 MPH Acceleration Comparison Is Extremely Close - Video

Now that McLaren has given us its Sports Series line-up, many wonder if Woking’s entry-level models are actually “junior” or not. We’re not here to talk about the 540C, as we’ll be focusing on the 570S instead. In the quest to see how fast the 570S is, the crew over at Option Auto have pitted the m... (continue reading >>)

Renault Talisman Pricing Leaked, Latest Photos Show Initiale Paris Trim - Photo Gallery

According to a bit of pricing information we've found, the new Talisman sedan will be competitively priced without being cheap. Prices will start at €28,150, making this big sedan cheaper even than the Espace MPV. The reason is that the Talisman range starts with an engine you wouldn't expect to be offered in this size of car, the 1.5 dCi rated at 110 horsepower. We've tested it on a Mercedes-Benz B-Class weighing ... (continue reading >>)

Ferrari 458 Spider Mansory Siracusa Monaco Edition Is One Scary-Sounding Machine - Video

Every once in a while, we need videos such as this one to remind us why supercars are cars with “super” in front of them. There are two types of amateur car videos flooding the internet lately: the first kind show us young people doing stupid things on the streets of London in their fast, expensive and very often extremely loud cars; the second also uses the streets of a well-known city as backdrop, but this category ... (continue reading >>)

700 HP Is Enough for Grandpa’s 1996 Nitrous-Fed Chevrolet Impala SS - Video

If GM’s bailout were an ambulance arriving at the scene of a crash, the 1990s would be the mistake that led to the accident. Still, that dark decade did have its exceptions, one of which was the 1994-1996 Impala SS. Despite its Corvette V8, though, the Impala always sent out the kind of vibe you get from a big, lazy dog. Until you dipped into the potential of its LT1 V8, that is. But what happens when somebody decides to double... (continue reading >>)

Chicago Cubs’ Manager Joe Maddon Upgrades His Dodge Van

The Cubs may not have won the 2015 World Series, like Back To The Future II predicted back in the 1980s, but since Joe Maddon joined the Chicago MLB team, he did lead them to the national tournament. Whether it's thanks to his famous “out of the box methods,” good fortune or a good game, ever since Joe Maddon took over the steering wheel, the Chicago Cubs have done quite well. They finished the season as the winn... (continue reading >>)

Weistec’s 670 HP Mercedes-AMG GT S Is the Fastest of Its Kind on a Quarter Mile Strip - Video

The guys from Weistec have just released a video of one of their creations, supposedly setting a world record for Mercedes-AMG GT models worldwide in the quarter mile run. Their car did the sprint in 10.8 seconds at a trap speed of 126.25 mph or 203.26 km/h. That’s supposed to be the fastest such run in the world done by one of the models built by Mercedes-Benz. That’s a tough claim to prove, but we’ll take t... (continue reading >>)

Yamaha Rumored to Part Ways with Lorenzo Because of His Attitude in the Rossi Case

The Rossi-Marquez incident at Sepang is sending more shockwaves in the paddocks, as new footage emerges and the situation unfolds. The latest paddock rumor sees Yamaha not at all happy with the attitude and declarations of Jorge Lorenzo regarding the incident that involved Valentino Rossi and Marc Marquez last Sunday at Sepang. (continue reading >>)

Mercedes-Benz 300d “Adenauer” Gets Restored to Its Former Glory - Video

Everybody loves a happy ending story, and nothing makes us happier than an old legendary car restored to its former best by a team of dedicated men. The car in question is a Mercedes-Benz Type-300d, also known as “Adenauer” after Konrad Adenauer, the first Chancellor of the Federal Republic of Germany who served between 1949 and 1963. At its time, it was the most luxurious Mercedes-Benz, on par with the other pampering... (continue reading >>)

1930s Ford Model A Hot Rod Has F1 Aero Elements, 9,000 RPM Engine - Video, Photo Gallery

Sacrilege - there’s always such a fine line between heavy words such as this one and projects that like to step out of the comfort zone. To our eyes, all the builds that fall into the second category are worthy of sharing with you. So here we are, talking about a hot rod with an F1 twist. The contraption you see here started out life as a 1930s five-window Ford Model A, but it has entered a reinvention process starting this spri... (continue reading >>)

BMW M235i Misses Racer by a Hair on the Nurburgring: Possible Mechanical Failure? - Video

One lucky driver that was out on the Nurburgring GP track managed to swerve his way out of the path of a BMW M235i in a millisecond. The whole thing was captured on camera and we still can’t believe how close things were. The action took place in the first corner of the circuit, which is known around the racing world as an incredibly tight hairpin that sneaks up on you after a high speed straight. Basically, if you’re ... (continue reading >>)

Spyshots: Production Lexus LF-LC Coupe Spied Near the Nurburgring - Photo Gallery

The production version of the Lexus LF-LC concept car is nearing its latest stages of development. A team of engineers was recently seen close to the Nurburgring track. Most of the development work has already been carried out in Japan, a fact proven by the lack of measuring devices. The LF-LC concept car was highly praised by automotive journalists and members of the public. It made its debut in January of 2012 at the North American Auto... (continue reading >>)

Tuesday, October 27, 2015

xXx Performance Gifts Lamborghini Huracan with 80 HP Upgrade, Wilder Soundtrack, We Say No

When Italian supercar passion meets German engineering, we end up with... Lamborghinis. However, we are here to discuss a German tuning package for the Lamborghini Huracan. Coming from xXx Performance, the kit gifts the V10 Raging Bull with a power premium of 80 hp and 90 Nm (66 lb-ft) of twist. As a result, the naturally aspirated 5.2-liter V10 now delivers 690 hp and 650 Nm (479 lb-ft). This was achieved thank... (continue reading >>)

Tesla Autopilot Comes with "Make Way for the Douche" Mode, As This Incident Proves - Video

Given how many people blame autonomous driving for taking the fun out of cars, the number of people trying the Tesla Autopilot is somewhat surprising. The pandemic originating in the US is rapidly spreading throughout Europe now, having reached Russia after a quick stop in Sweden we’ve already talked about. Unlike the guy testing the feature in the Scandinavian country, these two drive (or rather are driven by) the Tesla in the ... (continue reading >>)